A natural draft cooling tower is a large structure typically used in power plants and other industrial processes. It used to dissipate waste heat into the atmosphere. It operates on the principle of natural convection, where the warm air rises. Also, it’s replaced by cooler air from the surrounding environment. Working Principle of Natural Draft […]
An induced draft cooling towers, Known as heat transfer device. It is used to remove waste heat from industrial processes, power plants, and other large-scale applications. It operates by using the principle of evaporative cooling, where water is used to remove heat from a process. And then circulated through the cooling tower to dissipate the […]
An induced draft cooling tower uses a fan to draw air through the tower and over the water to cool it. The fan is located at the top of the tower and draws air in from the sides. It creating a negative pressure that induces air to flow through the tower. Features of Induced draft […]
In dry cooling tower, There is no direct contact between the surrounding air and the fluid being cooled. These are also closed circuit system. A heat exchanger and fans drive the airstream through the heat exchanger to cool the water or glycol solution passing through it. It makes up the simple yet reliable design of dry cooling towers. […]
Dry vs Wet Cooling Tower Wet cooling towers can lower the process water temperature below the ambient temperature to a particular degree above the dew point by using the latent heat of water evaporation to exchange heat with the air stream passing through them (approach temperature). In contrast, a dry cooler just reduces the water’s […]
Cooling tower component: Every cooling tower and the component is developed and engineered using a comprehensive system approach to function as an integrated system for effective performance and extended life. HVAC Free Cooling With a free cooling system, the tower may directly provide a building’s cooling requirements without having to run the chiller throughout the […]
